Price: 5.92 - 4.14
Feature:
R3 ATMEGA328P CH340 Development Board, compatible with Arduino UNO R3 IDE
Brand new, sealed package.
The best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the board is the most robust board you can start playing with. It is the most used and documented board.
This is a microcontroller board based on the ATmega328P.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. You can tinker with your board without worrying too much about doing something wrong, worst case scenario you can replace the chip and start over again.
The Uno board is the first in a series, and the reference model for the platform.
R3 ATMEGA328P CH340 Development Board, compatible with Arduino UNO R3 IDE
Brand new, sealed package.
The best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the board is the most robust board you can start playing with. It is the most used and documented board.
This is a microcontroller board based on the ATmega328P.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. You can tinker with your board without worrying too much about doing something wrong, worst case scenario you can replace the chip and start over again.
The Uno board is the first in a series, and the reference model for the platform.
Tech Specs:
Microcontroller:ATmega328P
Operating Voltage:5V
Input Voltage (recommended):7-12V
Input Voltage (limit):6-20V
Digital I/O Pins:14 (of which 6 provide PWM output)
PWM Digital I/O Pins:6
Analog Input Pins:6
DC Current per I/O Pin:20 mA
DC Current for 3.3V Pin:50 mA
Flash Memory:32 KB (ATmega328P) of which 0.5 KB used by bootloader
SRAM:2 KB (ATmega328P)
EEPROM:1 KB (ATmega328P)
Clock Speed:16 MHz
LED_BUILTIN:13
Included:
1x Development Board
1x USB Cable
1 x Connection Cable