Note: If you want to place the bulk order that the stock is not enough, please contact with us.
This is joystick control and button keypad breakout board module. Onboard one game joystick and 4 buttons. The shape of the PCB is suitable for your hands.
It leads out Shield pins and you can solder the pin headers so that it becomes a shield compatible for Arduino.
It leads out I2C port and you connect it with I2C oled / I2C 1602 LCD module to display something.
It leads out D8 / D12 / D13 and you can connect it [OPEN-SMART 2.4G Wireless Serial Transparent Transceiver Module] so that you can make a wireless remote control to control your smart car / 4-axis aircraft. Also you can use D12 / D13 to be software serial port to connect it with serial Bluetooth-compatible module.
Thumb joystick X-Axis movement will produce a analog signal on pin OUTX, while Y-Axis movement will produce a proportional analog voltage on pin OUTY, and Z-Axis movement will produce a digital signal on pin OUTZ.
Features:
– Compatibility: compatible for Arduino.
– Working voltage: 3-5.5V
– Working current: 2mA
– Buttons: with beautiful color key cap and pins are all float, so you should pull up it in your MCU(Active low level output)
– Thumb joystick: x and y axis output voltage is 0-VCC, z axis is a float button, you should also pull up it in your MCU(Active low level output).
– Positioning hole diameter: 3.2mm
Photos
Part List (Schematics and program can be sent, Please contact us)
